The introduction of the Pulstar p100 in 2012 into Synrad's globally acclaimed portfolio of industrial CO2 lasers signified the arrival of a new era of specialized CO2 laser processing. Featuring 100 Watts of average power and an impressive 400 Watts of peak pulse power (typical), the p100 is excellently suited for a wide variety applications, including high speed drilling and perforating, where quicker results, deeper cutting/marking, and minimal heat affect zone on delicate materials is crucial.
With fully integrated RF components, the p100 completely eliminates the need for external RF cabling and bulky external RF supplies. And, with the same familiar LED indicators, interface, and I/O signal configuration commonly found on many of Synrad's acclaimed Firestar line of lasers, installation/operation is a quick and easy.
Lighter than competing lasers on the market with a smaller footprint, compact body size and powerful internal architecture, the p100's versatile design makes it an excellent choice for manufacturers and OEMs seeking big power in a smaller, easy to handle package.
firestar p100 Specifications: | ||||
Average Output Power * |
100W
|
|||
Peak Pulse Power (typical) |
400W
|
|||
Peak Pulse Energy |
190mJ
|
|||
Mode Quality |
M² < 1.2
|
|||
Ellipticity |
< 1.2
|
|||
Rise Time |
< 40 µsec
|
|||
Beam Waist Diameter (at 1/e2) |
7.5 mm ± 1.1mm
|
|||
Beam Divergence (full angle) |
< 2.1 mRad
|
|||
Wavelength (typical) |
10.5 µm – 10.7µm
|
|||
Power Stability (guaranteed from cold start) |
±7%
|
|||
Power Stability (typical after two minutes) |
±5%
|
|||
Duty Cycle |
0% - 37.5%
|
|||
Polarization |
Linear (Vertical)
|
|||
Cooling |
Water
|
|||
Heat Load (max) |
2000W |
|||
Flow Rate **
|
1.5 - 2.0GPM < 60PSI
|
|||
Input Voltage / Current |
48 ± 1.0 VDC / 40A
(75A peak for < 700 µs) |
|||
Dimensions (in)
Dimensions (mm) |
22.2 x 5.2 x 6.1
563 x 132 x 155 |
|||
Weight |
30.0 lbs / 13.6kg
|
|||
Specifications subject to change without notice. |