Laser Plotter Cometa is the large laser cutting machine of the Proel range for laser cutting and laser engraving. This machine, available in the 25, 50 or the 100 Watt version, is ideal for those who need to cut large sizes of material (up to 1600x850 mm) or even to cut material supplied in rolls.
The machine equipped with a CO2 Laser source of 25, 50, 100 or 200 Watt (air-cooled), a cutting head driven on two axes by powerful brushless motors, the possibility of assembling either a fixed cutting plane or a motorized cutting plane (for automatic loading/discharge of material to be worked/finished). Usable cutting area (1600x850 mm), external fume suction device that may be connected to a filtering unit, RS-232 interface for connection to a Personal Computer, possibility of control at three power levels (usually one for cutting and two for engraving), possibility of selecting two cutting modes: constant speed or variable speed for optimizing times, cleaning of the cutting head using air produced by an internal pump or with air produced by an external source or with gases specific for laser cutting (usually Nitrogen). Laser pointer for positioning the material to be used.
MAIN OPERATING FUNTIONS

• Memorization of 10 different work profiles
• Management of 6 languages for interfacing with the user
• Management of ten levels of laser power
• Setting of the cutting/engraving speed
• Setting of the cutting head handling mode
• Possibility of manually positioning the cutting head by means of the control panel
• Possibility of manually handling the cutting plane advancement by means of the control panel
• "Spot Laser" function for locating the laser ray on the material to be used
• "Pause Cut" function
• Possibility of continuing an unfinished job even after an electrical power failure
• Self-diagnostic feature
• Cutting assisted by a videocamera
• Cutting of compositions (automatic repetition of the same cutting shape)
• Management of different fume suction modes
• Possibility of cutting the material in a straight line by means of the control panel
• Work hours count
• Work cycles count for each job
• Display of the position of the cutting head (in X,Y coordinates)

The Manufacturer reserves the right to make modifications and improvements without prior warning